EMC-103MP Global Shutter CMOS
A lightweight camera with an astounding 103 million pixels!
The EMC-103MP Global Shutter CMOS is available in color, and monochrome versions and is designed for use in aerial imaging, embedded systems and industrial applications.
Especially designed for UAV’s, Drones and other remote controlled aerial vehicles, the EMC-103 weighs approx. 210 grams (without lens). A native connection to the EPIX mf2280 M.2 capture card, provides an extremely simple and compact solution for embedded systems.
The EMC-103 uses the Gpixel GMAX32103 CMOS sensors in 35mm format. The sensors have 14 digital outputs each running up to 50Mhz. This results in 6 fps at full resolution in Camera Link Full mode. Higher frame rates can be achieved in ROI/windowing mode.
Product Highlights
- 11,276 x 9,200 3.2μm active pixels
- Imaging area 36.1 x 29.4 mm ~ 35mm
- Weight approx. 210 grams without lens mount
- Global shutter CMOS: Dynamic Range 65dB
- Image Storage in Internal Memory
- Flat Field and Shading Correction
- Windowing ROI capability
- Field Updatable Firmware and Extensive Built In Test (BIT)
- Lens Mount Options: M58/OEM, Nikon F, Canon EF
- Incredibly Low Dark Current for Long Exposures
Technical Information
CONNECTIONS
The pin table and connector image reference the camera connector as viewed from the camera back. The mating connector manufacturer and part number are Hirose HR10A-7P-6P.
DRAWINGS
Sensor Graphs
Filter Graphs
Power Supply
ACCESSORIES
Recommended Capture Card:
Teledyne Dalsa Xtium-CL MX4 OR-Y4C0-XMX00